Heartland-Motors-Final-550_

Large Industrial Electric Motor Specialists

GE Quantum 580/7000 Motor For Sale

Table of Contents

GE Quantum 580/7000

Medium Voltage TEFC

Medium Voltage TEFC With Anti-Friction Bearings

Medium Voltage WPII and WPI

Medium Voltage TEFC With Sleeve Bearings

Heartland is proud to offer the GE Quantum 580 motor as part of our inventory lineup. The Quantum 580 incorporates GE‘s long history of building reliable motors with the latest technology. When it comes to performance, efficiency, and reliable, no other company can do it better. This Quantum motor is known for it’s premium efficiency offered for low cost operations across the board.

GE Quantum 580/7000 Motors For Sale

Call Heartland Motors today to check on our pricing for the GE Quantum 580 motors we have available for a fast shipment time of 10 to 12 weeks. We can offer you extremely competitive pricing on this powerhouse of a motor.

615-839-4000

GE industrial motors Wolong logo
ge quantum 580 motor

24 Hour Support Available

Key Features of the Quantum 580/7000

All ratings found on this page, and the packet located on this page, meet NEMA Premium® efficiencies and comply with the Energy Independence & Security Act.

  • WP-I or WP-II enclosures
  • Premium Efficiency and Inverter Ready
  • Copper bar rotor (aluminum available)
  • C5 core plate laminations for low losses
  • Class F insulation system with Class B rise (90C by
    RTD)
  • Custom PolySeal® insulation system
  • Dual labyrinth shaft seals
  • Drilled for dowel pins and jack screws
  • Low noise
  • Altitude operation through 1000m (3300ft) is standard with capability for higher altitudes

GE Quantum 580/7000 Medium Voltage TEFC Standard Features:

HP Range: 700 – 1750
Poles: 2, 4, 6
Voltage: 2300/4000
Altitude: 3300 ft
Ambient: 40°C to -20°C
Balance/Vibration: NEMA Grade A
Bearing Insulation: Insulated bearing with grounding strap for Sleeve Bearings
Insulated bearing brackets on both ends for Anti-Friction Bearings
Bearing Protection: Grease retainer on both ends (Anti-Friction Bearings) Labyrinth seals on both ends (Sleeve Bearings)
Bearing Temp Device: 100 Ohm Platinum RTD both bearings
Bearing Type: Antifriction Bearings, 2-Pole 5811/5812/7011 Sleeve Bearings
Bearing L10 Life: Direct Coupled 100,000 hrs
Conduit Box: Fabricated Steel; Gasketed and rotatable in 90 degree increments
Div 2 Temp Codes: Self Certified Class I Div 2 Groups A, B, C, D T3 200C AIT (unless otherwise noted on price page)
Efficiency: NEMA Premium
Enclosure: TEFC (IP 55)
End Shield: Gray Cast Iron, Frame 5809/5810/5811/5812 Grade 30, Frame 7010/7011 Grade 60
Fan: Bi-Directional; Uni-directional for 2 poles (unless otherwise noted on price page)
Fan Cover: Fabricated Steel
Fasteners: SAE Grade 5, Zinc chromate coated
Frame Material: Gray Cast Iron, Frame 5809/5810/5811/5812 Grade 30, Frame 7010/7011 Grade 60
Frame Size: 5809, 5810, 5811, 5812, 7010, 7011
Frequency: 60 Hz

Ground: Ground in main conduit box and 2 holes diagonally opposite on frame feet.
Insulation: Class Class F
Insulation System: Form coil epoxy VPI
Inverter Capabilities: Consult Factory
Leads: Permanently numbered, Non-wicking
Lifting Means: Two (2) cast in lifting lugs
Lubrication: Mobil PolyRex EM Grease; Self Cooled Lube Oil up to 40 deg C
Mounting Foot: Mounted F1
Mounting Holes: Dual drilled for 5809/5810, 5811/5812 mounting , Single drilled 7010, 7011
Nameplate: 304 Stainless Steel
NEMA Design: NEMA MG-1, Part 20 Standard Torques
Paint: Frame 5809, 5810, 5811, 5812 Epoxyester Buff
Frame 7010, 7011 Epoxyester Dark Grey
Relubrication: Yes, both ends; extended through the fan cover
Rotor: Copper bar
Service Factor: 1.15 (unless otherwise noted on pricing pages)
Shaft Material: AISI 4142
Space Heater: 120V Space heater, leads to accessory box
Stator Temp Device 100 platinum RTD’s (total of 6, 2 per phase), leads to accessory box
Temperature Rise: 90°C @ 1.0 SF (unless otherwise noted on pricing pages) by resistance
Tests: NEMA routine, IEEE 112
Time Rating: Continuous
Vertical Jack Screws: Provisions on Frame
Warranty: 12 months from date of installation or 18 months from date of manufacture, whichever occurs first

GE Quantum 580/7000 Medium Voltage WPII and WPI

HP Range: 800 – 2500
Poles: 2, 4, 6
Voltage: 2300/4000
Altitude: 3300 ft
Ambient: 40°C to -20°C
Balance/Vibration: NEMA Grade A
Bearing Insulation: Insulated bearing with grounding strap for Sleeve Bearings
Insulated bearing brackets on both ends for Anti-Friction Bearings
Bearing Protection: Grease retainer on both ends (Anti-Friction Bearings) Labyrinth seals on both ends (Sleeve Bearings)
Bearing Temp Device: 100 Ohm Platinum RTD both bearings
Bearing Type: Antifriction Bearings, 2-Pole 5812/5813 Sleeve Bearings
Bearing L10 Life: Direct Coupled 100,000 hrs
Conduit Box: Fabricated Steel; Gasketed and rotatable in 90 degree increments
Div 2 Temp Codes: Self Certified Class I Div 2 Groups A, B, C, D T3 200C AIT (unless otherwise noted on price page)
Efficiency: NEMA Premium (unless otherwise noted on price page)
Enclosure: WPII (IP 24) and WPI (IP 23)
End Shield: Gray Cast Iron Grade 30
Fasteners: SAE Grade 5, Zinc chromate plated
Frame Material: Gray Cast Iron Grade 30
Frame Size: 5810, 5811, 5812, 5813
Frequency: 60 Hz

Ground: Ground in main conduit box and 2 holes diagonally opposite on frame feet.
Insulation: Class Class F
Insulation System: Form coil epoxy VPI
Inverter Capabilities: Consult Factory
Leads: Permanently numbered, Non-wicking
Lifting Means: Four (4) cast in lifting lugs
Lubrication: Mobil PolyRex EM Grease; Self Cooled Lube Oil up to 40 deg C
Mounting Foot: Mounted F1
Mounting Holes: Dual drilled for 5810/5811, 5812/5813 mounting
Nameplate: 304 Stainless Steel
NEMA Design: NEMA MG-1, Part 20 Standard Torques
Paint: Epoxyester Buff
Relubrication: Yes, both ends
Rotor: Copper bar
Service Factor: 1.15 (unless otherwise noted on pricing pages)
Shaft Material: AISI 4142
Space Heater: 120V Space heater, leads to accessory box
Stator Temp Device: 100 platinum RTD’s (total of 6, 2 per phase), leads to accessory box
Temperature Rise: 90°C @ 1.0 SF (unless otherwise noted on pricing pages) by resistance
Tests: NEMA routine, IEEE 112
Time Rating: Continuous
Vertical Jack Screws: Provisions on Frame
Warranty: 12 months from date of installation or 18 months from date of manufacture, whichever occurs first

970-426-9171

Why Buy a 580 Series Quantum Motor by General Electric?

The GE Quantum 580 is designed for premium efficiency, lowering operating costs for industrial users. It is Inverter Ready, allowing the motor to pair with a variable frequency drive for maximum energy savings through variable speed operation and flexibility across many applications.

A copper bar rotor, C5 grade electrical steel core, and Custom PolySeal insulation system boost efficiency and motor reliability and repairability. Dual mounting holes allow flexible installation orientations. Corrosion-resistant hardware improves durability in harsh environments.

For models above 3000 volts, the terminal box is sized to accommodate stress cones. A low profile WP-II heat exchanger enables easier retrofits into existing setups. High locked rotor torque (60%), pull up torque (60%), and breakdown torque (175%) deliver strong performance. With this robust combination of features, the Quantum 580 provides an intelligent motor solution for industrial drives.

Learn More About The 580/7000

You can download our PDF on the 580 series Quantum Motor. Within this document, you can learn more about the key benefits, ratings, and other features on this motor.

Related Posts

AC Motors vs. DC Motors Explained

At Heartland Motors, we understand that electric motors are essential components of many industrial, commercial and residential applications. The two main types of electric motors

What Are Industrial Electric Motors?

Electric motors are essential components in a wide range of industrial applications. They convert electrical energy into mechanical energy to power machinery, equipment and automated

Scroll to Top